dmesg - rummages 48 pts system
Initializing cgroup subsys cpuset
Initializing cgroup subsys cpu
Linux version 3.8.0-19-generic (buildd@roseapple) (gcc version 4.7.3 (Ubuntu/Linaro 4.7.3-1ubuntu1) ) #30-Ubuntu SMP Wed May 1 16:36:13 UTC 2013 (Ubuntu 3.8.0-19.30-generic 3.8.8)
KERNEL supported cpus:
Intel GenuineIntel
AMD AuthenticAMD
NSC Geode by NSC
Cyrix CyrixInstead
Centaur CentaurHauls
Transmeta GenuineTMx86
Transmeta TransmetaCPU
UMC UMC UMC UMC
e820: BIOS-provided physical RAM map:
BIOS-e820: [mem 0x0000000000000000-0x000000000008efff] usable
BIOS-e820: [mem 0x000000000008f000-0x000000000009ffff] reserved
BIOS-e820: [mem 0x00000000000e0000-0x00000000000fffff] reserved
BIOS-e820: [mem 0x0000000000100000-0x00000000c8f53fff] usable
BIOS-e820: [mem 0x00000000c8f54000-0x00000000c9136fff] ACPI NVS
BIOS-e820: [mem 0x00000000c9137000-0x00000000c9456fff] usable
BIOS-e820: [mem 0x00000000c9457000-0x00000000c94d6fff] reserved
BIOS-e820: [mem 0x00000000c94d7000-0x00000000cb6b8fff] usable
BIOS-e820: [mem 0x00000000cb6b9000-0x00000000cb6befff] reserved
BIOS-e820: [mem 0x00000000cb6bf000-0x00000000cb717fff] usable
BIOS-e820: [mem 0x00000000cb718000-0x00000000cb7befff] ACPI NVS
BIOS-e820: [mem 0x00000000cb7bf000-0x00000000cb7defff] usable
BIOS-e820: [mem 0x00000000cb7df000-0x00000000cb7f1fff] ACPI data
BIOS-e820: [mem 0x00000000cb7f2000-0x00000000cb7f2fff] usable
BIOS-e820: [mem 0x00000000cb7f3000-0x00000000cb7fefff] ACPI data
BIOS-e820: [mem 0x00000000cb7ff000-0x00000000cb7fffff] usable
BIOS-e820: [mem 0x00000000cb800000-0x00000000cfffffff] reserved
BIOS-e820: [mem 0x00000000f0000000-0x00000000ffffffff] reserved
BIOS-e820: [mem 0x0000000100000000-0x000000042fffffff] usable
NX (Execute Disable) protection: active
SMBIOS 2.6 present.
DMI: /DX79SR, BIOS SIX7910J.86A.0494.2012.0424.1039 04/24/2012
e820: update [mem 0x00000000-0x0000ffff] usable ==> reserved
e820: remove [mem 0x000a0000-0x000fffff] usable
e820: last_pfn = 0x430000 max_arch_pfn = 0x1000000
MTRR default type: write-back
MTRR fixed ranges enabled:
00000-9FFFF write-back
A0000-BFFFF uncachable
C0000-DFFFF write-protect
E0000-FFFFF uncachable
MTRR variable ranges enabled:
0 base 0000CC000000 mask 3FFFFC000000 uncachable
1 base 0000D0000000 mask 3FFFF0000000 uncachable
2 base 0000E0000000 mask 3FFFF0000000 uncachable
3 base 0000F0000000 mask 3FFFF8000000 uncachable
4 base 0000F8000000 mask 3FFFFC000000 uncachable
5 base 0000FC000000 mask 3FFFFE000000 uncachable
6 base 0000FE000000 mask 3FFFFF000000 uncachable
7 disabled
8 disabled
9 disabled
x86 PAT enabled: cpu 0, old 0x7040600070406, new 0x7010600070106
initial memory mapped: [mem 0x00000000-0x01ffffff]
Base memory trampoline at [c008b000] 8b000 size 16384
init_memory_mapping: [mem 0x00000000-0x37bfdfff]
[mem 0x00000000-0x001fffff] page 4k
[mem 0x00200000-0x379fffff] page 2M
[mem 0x37a00000-0x37bfdfff] page 4k
kernel direct mapping tables up to 0x37bfdfff @ [mem 0x01ffa000-0x01ffffff]
RAMDISK: [mem 0x34428000-0x3620bfff]
ACPI: RSDP 000fe020 00024 (v02 INTEL )
ACPI: XSDT cb7fd120 00064 (v01 INTEL DX79SR 000001EE 01000013)
ACPI: FACP cb7fc000 000F4 (v03 INTEL DX79SR 000001EE MSFT 0100000D)
ACPI: DSDT cb7f7000 04F75 (v02 INTEL DX79SR 000001EE MSFT 0100000D)
ACPI: FACS cb722000 00040
ACPI: APIC cb7f6000 00138 (v02 INTEL DX79SR 000001EE MSFT 0100000D)
ACPI: MCFG cb7f5000 0003C (v01 INTEL DX79SR 000001EE MSFT 0100000D)
ACPI: ASF! cb7f4000 000A5 (v32 INTEL DX79SR 000001EE MSFT 0100000D)
ACPI: HPET cb7f3000 00038 (v01 INTEL DX79SR 000001EE MSFT 0100000D)
ACPI: ASPT cb7f1000 00034 (v07 INTEL DX79SR 000001EE MSFT 0100000D)
ACPI: SSDT cb7e1000 0F054 (v01 INTEL SSDT PM 000001EE MSFT 0100000D)
ACPI: DMAR cb7df000 000E8 (v01 INTEL DX79SR 000001EE MSFT 0100000D)
ACPI: Local APIC address 0xfee00000
16260MB HIGHMEM available.
891MB LOWMEM available.
mapped low ram: 0 - 37bfe000
low ram: 0 - 37bfe000
Zone ranges:
DMA [mem 0x00010000-0x00ffffff]
Normal [mem 0x01000000-0x37bfdfff]
HighMem [mem 0x37bfe000-0x2fffffff]
Movable zone start for each node
Early memory node ranges
node 0: [mem 0x00010000-0x0008efff]
node 0: [mem 0x00100000-0xc8f53fff]
node 0: [mem 0xc9137000-0xc9456fff]
node 0: [mem 0xc94d7000-0xcb6b8fff]
node 0: [mem 0xcb6bf000-0xcb717fff]
node 0: [mem 0xcb7bf000-0xcb7defff]
node 0: [mem 0xcb7f2000-0xcb7f2fff]
node 0: [mem 0xcb7ff000-0xcb7fffff]
node 0: [mem 0x00000000-0x2fffffff]
On node 0 totalpages: 4174928
free_area_init_node: node 0, pgdat c18f6100, node_mem_map ebe28200
DMA zone: 32 pages used for memmap
DMA zone: 0 pages reserved
DMA zone: 3935 pages, LIFO batch:0
Normal zone: 1752 pages used for memmap
Normal zone: 222502 pages, LIFO batch:31
HighMem zone: 32521 pages used for memmap
HighMem zone: 3914186 pages, LIFO batch:31
Using APIC driver default
ACPI: PM-Timer IO Port: 0x408
ACPI: Local APIC address 0xfee00000
ACPI: LAPIC (acpi_id[0x00] lapic_id[0x00] enabled)
ACPI: LAPIC (acpi_id[0x01] lapic_id[0x01] enabled)
ACPI: LAPIC (acpi_id[0x02] lapic_id[0x02] enabled)
ACPI: LAPIC (acpi_id[0x03] lapic_id[0x03] enabled)
ACPI: LAPIC (acpi_id[0x04] lapic_id[0x04] enabled)
ACPI: LAPIC (acpi_id[0x05] lapic_id[0x05] enabled)
ACPI: LAPIC (acpi_id[0x06] lapic_id[0x06] enabled)
ACPI: LAPIC (acpi_id[0x07] lapic_id[0x07] enabled)
ACPI: LAPIC (acpi_id[0x08] lapic_id[0x08] enabled)
ACPI: NR_CPUS/possible_cpus limit of 8 reached. Processor 8/0x8 ignored.
ACPI: LAPIC (acpi_id[0x09] lapic_id[0x09] enabled)
ACPI: NR_CPUS/possible_cpus limit of 8 reached. Processor 9/0x9 ignored.
ACPI: LAPIC (acpi_id[0x0a] lapic_id[0x0a] enabled)
ACPI: NR_CPUS/possible_cpus limit of 8 reached. Processor 10/0xa ignored.
ACPI: LAPIC (acpi_id[0x0b] lapic_id[0x0b] enabled)
ACPI: NR_CPUS/possible_cpus limit of 8 reached. Processor 11/0xb ignored.
ACPI: LAPIC (acpi_id[0x0c] lapic_id[0x00] disabled)
ACPI: LAPIC (acpi_id[0x0d] lapic_id[0x00] disabled)
ACPI: LAPIC (acpi_id[0x0e] lapic_id[0x00] disabled)
ACPI: LAPIC (acpi_id[0x0f] lapic_id[0x00] disabled)
ACPI: LAPIC_NMI (acpi_id[0x00] high level lint[0x1])
ACPI: LAPIC_NMI (acpi_id[0x01] high level lint[0x1])
ACPI: LAPIC_NMI (acpi_id[0x02] high level lint[0x1])
ACPI: LAPIC_NMI (acpi_id[0x03] high level lint[0x1])
ACPI: LAPIC_NMI (acpi_id[0x04] high level lint[0x1])
ACPI: LAPIC_NMI (acpi_id[0x05] high level lint[0x1])
ACPI: LAPIC_NMI (acpi_id[0x06] high level lint[0x1])
ACPI: LAPIC_NMI (acpi_id[0x07] high level lint[0x1])
ACPI: LAPIC_NMI (acpi_id[0x08] high level lint[0x1])
ACPI: LAPIC_NMI (acpi_id[0x09] high level lint[0x1])
ACPI: LAPIC_NMI (acpi_id[0x0a] high level lint[0x1])
ACPI: LAPIC_NMI (acpi_id[0x0b] high level lint[0x1])
ACPI: LAPIC_NMI (acpi_id[0x0c] high level lint[0x1])
ACPI: LAPIC_NMI (acpi_id[0x0d] high level lint[0x1])
ACPI: LAPIC_NMI (acpi_id[0x0e] high level lint[0x1])
ACPI: LAPIC_NMI (acpi_id[0x0f] high level lint[0x1])
ACPI: IOAPIC (id[0x02] address[0xfec00000] gsi_base[0])
IOAPIC[0]: apic_id 2, version 32, address 0xfec00000, GSI 0-23
ACPI: IOAPIC (id[0x01] address[0xfec3f000] gsi_base[24])
IOAPIC[1]: apic_id 1, version 32, address 0xfec3f000, GSI 24-47
ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
ACPI: IRQ0 used by override.
ACPI: IRQ2 used by override.
ACPI: IRQ9 used by override.
Using ACPI (MADT) for SMP configuration information
ACPI: HPET id: 0x8086a701 base: 0xfed00000
smpboot: 16 Processors exceeds NR_CPUS limit of 8
smpboot: Allowing 8 CPUs, 0 hotplug CPUs
nr_irqs_gsi: 64
PM: Registered nosave memory: 000000000008f000 - 00000000000a0000
PM: Registered nosave memory: 00000000000a0000 - 00000000000e0000
PM: Registered nosave memory: 00000000000e0000 - 0000000000100000
e820: [mem 0xd0000000-0xefffffff] available for PCI devices
Booting paravirtualized kernel on bare hardware
setup_percpu: NR_CPUS:8 nr_cpumask_bits:8 nr_cpu_ids:8 nr_node_ids:1
PERCPU: Embedded 14 pages/cpu @f7b7a000 s35008 r0 d22336 u57344
pcpu-alloc: s35008 r0 d22336 u57344 alloc=14*4096
pcpu-alloc: [0] 0 [0] 1 [0] 2 [0] 3 [0] 4 [0] 5 [0] 6 [0] 7
Built 1 zonelists in Zone order, mobility grouping on. Total pages: 4140623
Kernel command line: BOOT_IMAGE=/vmlinuz-3.8.0-19-generic root=/dev/mapper/xubuntu--vg-root ro quiet splash
PID hash table entries: 4096 (order: 2, 16384 bytes)
Dentry cache hash table entries: 131072 (order: 7, 524288 bytes)
Inode-cache hash table entries: 65536 (order: 6, 262144 bytes)
__ex_table already sorted, skipping sort
Initializing CPU#0
xsave: enabled xstate_bv 0x7, cntxt size 0x340
allocated 35127168 bytes of page_cgroup
please try 'cgroup_disable=memory' option if you don't want memory cgroups
Initializing HighMem for node 0 (00037bfe:00430000)
Memory: 16485268k/17563648k available (6251k kernel code, 214444k reserved, 2973k data, 784k init, 15786828k highmem)
virtual kernel memory layout:
fixmap : 0xfff14000 - 0xfffff000 ( 940 kB)
pkmap : 0xffc00000 - 0xffe00000 (2048 kB)
vmalloc : 0xf83fe000 - 0xffbfe000 ( 120 MB)
lowmem : 0xc0000000 - 0xf7bfe000 ( 891 MB)
.init : 0xc1903000 - 0xc19c7000 ( 784 kB)
.data : 0xc161ad70 - 0xc19023c0 (2973 kB)
.text : 0xc1000000 - 0xc161ad70 (6251 kB)
Checking if this processor honours the WP bit even in supervisor mode...Ok.
SLUB: Genslabs=15, HWalign=64, Order=0-3, MinObjects=0, CPUs=8, Nodes=1
Hierarchical RCU implementation.
RCU dyntick-idle grace-period acceleration is enabled.
NR_IRQS:2304 nr_irqs:1152 16
CPU 0 irqstacks, hard=f740a000 soft=f740c000
Extended CMOS year: 2000
Console: colour VGA+ 80x25
console [tty0] enabled
hpet clockevent registered
tsc: Fast TSC calibration using PIT
tsc: Detected 3999.781 MHz processor
Calibrating delay loop (skipped), value calculated using timer frequency.. 7999.56 BogoMIPS (lpj=15999124)
pid_max: default: 32768 minimum: 301
Security Framework initialized
AppArmor: AppArmor initialized
Yama: becoming mindful.
Mount-cache hash table entries: 512
Initializing cgroup subsys cpuacct
Initializing cgroup subsys memory
Initializing cgroup subsys devices
Initializing cgroup subsys freezer
Initializing cgroup subsys blkio
Initializing cgroup subsys perf_event
Initializing cgroup subsys hugetlb
CPU: Physical Processor ID: 0
CPU: Processor Core ID: 0
ENERGY_PERF_BIAS: Set to 'normal', was 'performance'
ENERGY_PERF_BIAS: View and update with x86_energy_perf_policy(8)
mce: CPU supports 18 MCE banks
CPU0: Thermal monitoring enabled (TM1)
process: using mwait in idle threads
Last level iTLB entries: 4KB 512, 2MB 0, 4MB 0
Last level dTLB entries: 4KB 512, 2MB 32, 4MB 32
tlb_flushall_shift: 5
Freeing SMP alternatives: 24k freed
ACPI: Core revision 20121018
ftrace: allocating 26116 entries in 52 pages
Enabling APIC mode: Flat. Using 2 I/O APICs
..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1
smpboot: CPU0: Intel(R) Core(TM) i7-3930K CPU @ 3.20GHz (fam: 06, model: 2d, stepping: 07)
TSC deadline timer enabled
Performance Events: PEBS fmt1+, 16-deep LBR, SandyBridge events, Intel PMU driver.
perf_event_intel: PEBS disabled due to CPU errata, please upgrade microcode
... version: 3
... bit width: 48
... generic registers: 4
... value mask: 0000ffffffffffff
... max period: 000000007fffffff
... fixed-purpose events: 3
... event mask: 000000070000000f
CPU 1 irqstacks, hard=f74f4000 soft=f74f6000
Initializing CPU#1
smpboot: Booting Node 0, Processors #1
TSC synchronization [CPU#0 -> CPU#1]:
Measured 607445500 cycles TSC warp between CPUs, turning off TSC clock.
tsc: Marking TSC unstable due to check_tsc_sync_source failed
NMI watchdog: enabled on all CPUs, permanently consumes one hw-PMU counter.
CPU 2 irqstacks, hard=f75ce000 soft=f75d8000
Initializing CPU#2
#2
CPU 3 irqstacks, hard=f7632000 soft=f7634000
Initializing CPU#3
#3
CPU 4 irqstacks, hard=f766e000 soft=f7678000
Initializing CPU#4
#4
CPU 5 irqstacks, hard=f76bc000 soft=f76be000
Initializing CPU#5
#5
CPU 6 irqstacks, hard=f7708000 soft=f770a000
Initializing CPU#6
#6
CPU 7 irqstacks, hard=f7770000 soft=f7772000
#7 OK
Initializing CPU#7
Brought up 8 CPUs
smpboot: Total of 8 processors activated (63996.49 BogoMIPS)
devtmpfs: initialized
EVM: security.selinux
EVM: security.SMACK64
EVM: security.capability
PM: Registering ACPI NVS region [mem 0xc8f54000-0xc9136fff] (1978368 bytes)
PM: Registering ACPI NVS region [mem 0xcb718000-0xcb7befff] (684032 bytes)
regulator-dummy: no parameters
NET: Registered protocol family 16
EISA bus registered
ACPI: bus type pci registered
PCI: MMCONFIG for domain 0000 [bus 00-3f] at [mem 0xf0000000-0xf3ffffff] (base 0xf0000000)
PCI: MMCONFIG at [mem 0xf0000000-0xf3ffffff] reserved in E820
PCI: Using MMCONFIG for extended config space
PCI: Using configuration type 1 for base access
bio: create slab at 0
ACPI: Added _OSI(Module Device)
ACPI: Added _OSI(Processor Device)
ACPI: Added _OSI(3.0 _SCP Extensions)
ACPI: Added _OSI(Processor Aggregator Device)
ACPI: EC: Look up EC in DSDT
ACPI: Interpreter enabled
ACPI: (supports S0 S3 S4 S5)
ACPI: Using IOAPIC for interrupt routing
ACPI: No dock devices found.
PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug
ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-3e])
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT]
PCI host bridge to bus 0000:00
pci_bus 0000:00: root bus resource [bus 00-3e]
pci_bus 0000:00: root bus resource [io 0x0000-0x0cf7]
pci_bus 0000:00: root bus resource [io 0x0d00-0xffff]
pci_bus 0000:00: root bus resource [mem 0x000a0000-0x000bffff]
pci_bus 0000:00: root bus resource [mem 0xd0000000-0xefffffff]
pci 0000:00:00.0: [8086:3c00] type 00 class 0x060000
pci 0000:00:00.0: PME# supported from D0 D3hot D3cold
pci 0000:00:01.0: [8086:3c02] type 01 class 0x060400
pci 0000:00:01.0: PME# supported from D0 D3hot D3cold
pci 0000:00:02.0: [8086:3c04] type 01 class 0x060400
pci 0000:00:02.0: PME# supported from D0 D3hot D3cold
pci 0000:00:03.0: [8086:3c08] type 01 class 0x060400
pci 0000:00:03.0: PME# supported from D0 D3hot D3cold
pci 0000:00:05.0: [8086:3c28] type 00 class 0x088000
pci 0000:00:05.2: [8086:3c2a] type 00 class 0x088000
pci 0000:00:05.4: [8086:3c2c] type 00 class 0x080020
pci 0000:00:05.4: reg 10: [mem 0xe3526000-0xe3526fff]
pci 0000:00:11.0: [8086:1d3e] type 01 class 0x060400
pci 0000:00:11.0: PME# supported from D0 D3hot D3cold
pci 0000:00:16.0: [8086:1d3a] type 00 class 0x078000
pci 0000:00:16.0: reg 10: [mem 0xe3600000-0xe360000f 64bit]
pci 0000:00:16.0: PME# supported from D0 D3hot D3cold
pci 0000:00:19.0: [8086:1502] type 00 class 0x020000
pci 0000:00:19.0: reg 10: [mem 0xe3500000-0xe351ffff]
pci 0000:00:19.0: reg 14: [mem 0xe3525000-0xe3525fff]
pci 0000:00:19.0: reg 18: [io 0x5040-0x505f]
pci 0000:00:19.0: PME# supported from D0 D3hot D3cold
pci 0000:00:1a.0: [8086:1d2d] type 00 class 0x0c0320
pci 0000:00:1a.0: reg 10: [mem 0xe3601000-0xe36013ff]
pci 0000:00:1a.0: PME# supported from D0 D3hot D3cold
pci 0000:00:1b.0: [8086:1d20] type 00 class 0x040300
pci 0000:00:1b.0: reg 10: [mem 0xe3520000-0xe3523fff 64bit]
pci 0000:00:1b.0: PME# supported from D0 D3hot D3cold
pci 0000:00:1c.0: [8086:1d10] type 01 class 0x060400
pci 0000:00:1c.0: PME# supported from D0 D3hot D3cold
pci 0000:00:1c.2: [8086:1d14] type 01 class 0x060400
pci 0000:00:1c.2: PME# supported from D0 D3hot D3cold
pci 0000:00:1c.3: [8086:1d16] type 01 class 0x060400
pci 0000:00:1c.3: PME# supported from D0 D3hot D3cold
pci 0000:00:1c.4: [8086:1d18] type 01 class 0x060400
pci 0000:00:1c.4: PME# supported from D0 D3hot D3cold
pci 0000:00:1c.5: [8086:1d1a] type 01 class 0x060400
pci 0000:00:1c.5: PME# supported from D0 D3hot D3cold
pci 0000:00:1c.7: [8086:1d1e] type 01 class 0x060400
pci 0000:00:1c.7: PME# supported from D0 D3hot D3cold
pci 0000:00:1d.0: [8086:1d26] type 00 class 0x0c0320
pci 0000:00:1d.0: reg 10: [mem 0xe3602000-0xe36023ff]
pci 0000:00:1d.0: PME# supported from D0 D3hot D3cold
pci 0000:00:1e.0: [8086:244e] type 01 class 0x060401
pci 0000:00:1f.0: [8086:1d41] type 00 class 0x060100
pci 0000:00:1f.2: [8086:1d02] type 00 class 0x010601
pci 0000:00:1f.2: reg 10: [io 0x5068-0x506f]
pci 0000:00:1f.2: reg 14: [io 0x5074-0x5077]
pci 0000:00:1f.2: reg 18: [io 0x5060-0x5067]
pci 0000:00:1f.2: reg 1c: [io 0x5070-0x5073]
pci 0000:00:1f.2: reg 20: [io 0x5020-0x503f]
pci 0000:00:1f.2: reg 24: [mem 0xe3527000-0xe35277ff]
pci 0000:00:1f.2: PME# supported from D3hot
pci 0000:00:1f.3: [8086:1d22] type 00 class 0x0c0500
pci 0000:00:1f.3: reg 10: [mem 0xe3528000-0xe35280ff 64bit]
pci 0000:00:1f.3: reg 20: [io 0x5000-0x501f]
pci 0000:00:01.0: PCI bridge to [bus 01]
pci 0000:02:00.0: [10de:0fc1] type 00 class 0x030000
pci 0000:02:00.0: reg 10: [mem 0xe2000000-0xe2ffffff]
pci 0000:02:00.0: reg 14: [mem 0xd0000000-0xdfffffff 64bit pref]
pci 0000:02:00.0: reg 1c: [mem 0xe0000000-0xe1ffffff 64bit pref]
pci 0000:02:00.0: reg 24: [io 0x4000-0x407f]
pci 0000:02:00.0: reg 30: [mem 0xfff80000-0xffffffff pref]
pci 0000:02:00.1: [10de:0e1b] type 00 class 0x040300
pci 0000:02:00.1: reg 10: [mem 0xe3000000-0xe3003fff]
pci 0000:00:02.0: PCI bridge to [bus 02]
pci 0000:00:02.0: bridge window [io 0x4000-0x4fff]
pci 0000:00:02.0: bridge window [mem 0xe2000000-0xe30fffff]
pci 0000:00:02.0: bridge window [mem 0xd0000000-0xe1ffffff 64bit pref]
pci 0000:00:03.0: PCI bridge to [bus 03]
pci 0000:00:11.0: PCI bridge to [bus 04]
pci 0000:00:1c.0: PCI bridge to [bus 05]
pci 0000:06:00.0: [1106:3403] type 00 class 0x0c0010
pci 0000:06:00.0: reg 10: [mem 0xe3400000-0xe34007ff 64bit]
pci 0000:06:00.0: reg 18: [io 0x3000-0x30ff]
pci 0000:06:00.0: supports D2
pci 0000:06:00.0: PME# supported from D2 D3hot D3cold
pci 0000:00:1c.2: PCI bridge to [bus 06]
pci 0000:00:1c.2: bridge window [io 0x3000-0x3fff]
pci 0000:00:1c.2: bridge window [mem 0xe3400000-0xe34fffff]
pci 0000:07:00.0: [1033:0194] type 00 class 0x0c0330
pci 0000:07:00.0: reg 10: [mem 0xe3300000-0xe3301fff 64bit]
pci 0000:07:00.0: PME# supported from D0 D3hot D3cold
pci 0000:00:1c.3: PCI bridge to [bus 07]
pci 0000:00:1c.3: bridge window [mem 0xe3300000-0xe33fffff]
pci 0000:00:1c.4: PCI bridge to [bus 08]
pci 0000:09:00.0: [8086:10d3] type 00 class 0x020000
pci 0000:09:00.0: reg 10: [mem 0xe3200000-0xe321ffff]
pci 0000:09:00.0: reg 18: [io 0x2000-0x201f]
pci 0000:09:00.0: reg 1c: [mem 0xe3220000-0xe3223fff]
pci 0000:09:00.0: PME# supported from D0 D3hot D3cold
pci 0000:00:1c.5: PCI bridge to [bus 09]
pci 0000:00:1c.5: bridge window [io 0x2000-0x2fff]
pci 0000:00:1c.5: bridge window [mem 0xe3200000-0xe32fffff]
pci 0000:0a:00.0: [1b4b:9130] type 00 class 0x010601
pci 0000:0a:00.0: reg 10: [io 0x1018-0x101f]
pci 0000:0a:00.0: reg 14: [io 0x1024-0x1027]
pci 0000:0a:00.0: reg 18: [io 0x1010-0x1017]
pci 0000:0a:00.0: reg 1c: [io 0x1020-0x1023]
pci 0000:0a:00.0: reg 20: [io 0x1000-0x100f]
pci 0000:0a:00.0: reg 24: [mem 0xe3100000-0xe31007ff]
pci 0000:0a:00.0: reg 30: [mem 0xffff0000-0xffffffff pref]
pci 0000:0a:00.0: PME# supported from D3hot
pci 0000:00:1c.7: PCI bridge to [bus 0a]
pci 0000:00:1c.7: bridge window [io 0x1000-0x1fff]
pci 0000:00:1c.7: bridge window [mem 0xe3100000-0xe31fffff]
pci 0000:00:1e.0: PCI bridge to [bus 0b] (subtractive decode)
pci 0000:00:1e.0: bridge window [io 0x0000-0x0cf7] (subtractive decode)
pci 0000:00:1e.0: bridge window [io 0x0d00-0xffff] (subtractive decode)
pci 0000:00:1e.0: bridge window [mem 0x000a0000-0x000bffff] (subtractive decode)
pci 0000:00:1e.0: bridge window [mem 0xd0000000-0xefffffff] (subtractive decode)
pci_bus 0000:00: on NUMA node 0
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.P32_._PRT]
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PEX0._PRT]
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PEX2._PRT]
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PEX3._PRT]
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PEX4._PRT]
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PEX5._PRT]
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PEX7._PRT]
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.EVRP._PRT]
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.JEX0._PRT]
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PEG1._PRT]
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PEG2._PRT]
pci0000:00: Requesting ACPI _OSC control (0x1d)
pci0000:00: ACPI _OSC control (0x1d) granted
ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 7 9 10 *11 12)
ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 5 7 *9 10 11 12)
ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 5 7 *9 10 11 12)
ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 5 7 9 *10 11 12)
ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 5 7 9 *10 11 12)
ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 5 7 9 10 11 12) *0, disabled.
ACPI: PCI Interrupt Link [LNKG] (IRQs 3 4 5 7 9 10 *11 12)
ACPI: PCI Interrupt Link [LNKH] (IRQs 3 4 5 7 9 10 *11 12)
vgaarb: device added: PCI:0000:02:00.0,decodes=io+mem,owns=io+mem,locks=none
vgaarb: loaded
vgaarb: bridge control possible 0000:02:00.0
SCSI subsystem initialized
ACPI: bus type scsi registered
libata version 3.00 loaded.
ACPI: bus type usb registered
usbcore: registered new interface driver usbfs
usbcore: registered new interface driver hub
usbcore: registered new device driver usb
PCI: Using ACPI for IRQ routing
PCI: Discovered peer bus 3f
PCI: root bus 3f: using default resources
PCI: Probing PCI hardware (bus 3f)
PCI host bridge to bus 0000:3f
pci_bus 0000:3f: root bus resource [io 0x0000-0xffff]
pci_bus 0000:3f: root bus resource [mem 0x00000000-0x3fffffffffff]
pci_bus 0000:3f: No busn resource found for root bus, will use [bus 3f-ff]
pci 0000:3f:08.0: [8086:3c80] type 00 class 0x088000
pci 0000:3f:09.0: [8086:3c90] type 00 class 0x088000
pci 0000:3f:0a.0: [8086:3cc0] type 00 class 0x088000
pci 0000:3f:0a.1: [8086:3cc1] type 00 class 0x088000
pci 0000:3f:0a.2: [8086:3cc2] type 00 class 0x088000
pci 0000:3f:0a.3: [8086:3cd0] type 00 class 0x088000
pci 0000:3f:0b.0: [8086:3ce0] type 00 class 0x088000
pci 0000:3f:0b.3: [8086:3ce3] type 00 class 0x088000
pci 0000:3f:0c.0: [8086:3ce8] type 00 class 0x088000
pci 0000:3f:0c.1: [8086:3ce8] type 00 class 0x088000
pci 0000:3f:0c.2: [8086:3ce8] type 00 class 0x088000
pci 0000:3f:0c.6: [8086:3cf4] type 00 class 0x088000
pci 0000:3f:0c.7: [8086:3cf6] type 00 class 0x088000
pci 0000:3f:0d.0: [8086:3ce8] type 00 class 0x088000
pci 0000:3f:0d.1: [8086:3ce8] type 00 class 0x088000
pci 0000:3f:0d.2: [8086:3ce8] type 00 class 0x088000
pci 0000:3f:0d.6: [8086:3cf5] type 00 class 0x088000
pci 0000:3f:0e.0: [8086:3ca0] type 00 class 0x088000
pci 0000:3f:0e.1: [8086:3c46] type 00 class 0x110100
pci 0000:3f:0f.0: [8086:3ca8] type 00 class 0x088000
pci 0000:3f:0f.1: [8086:3c71] type 00 class 0x088000
pci 0000:3f:0f.2: [8086:3caa] type 00 class 0x088000
pci 0000:3f:0f.3: [8086:3cab] type 00 class 0x088000
pci 0000:3f:0f.4: [8086:3cac] type 00 class 0x088000
pci 0000:3f:0f.5: [8086:3cad] type 00 class 0x088000
pci 0000:3f:0f.6: [8086:3cae] type 00 class 0x088000
pci 0000:3f:10.0: [8086:3cb0] type 00 class 0x088000
pci 0000:3f:10.1: [8086:3cb1] type 00 class 0x088000
pci 0000:3f:10.2: [8086:3cb2] type 00 class 0x088000
pci 0000:3f:10.3: [8086:3cb3] type 00 class 0x088000
pci 0000:3f:10.4: [8086:3cb4] type 00 class 0x088000
pci 0000:3f:10.5: [8086:3cb5] type 00 class 0x088000
pci 0000:3f:10.6: [8086:3cb6] type 00 class 0x088000
pci 0000:3f:10.7: [8086:3cb7] type 00 class 0x088000
pci 0000:3f:11.0: [8086:3cb8] type 00 class 0x088000
pci 0000:3f:13.0: [8086:3ce4] type 00 class 0x088000
pci 0000:3f:13.1: [8086:3c43] type 00 class 0x110100
pci 0000:3f:13.4: [8086:3ce6] type 00 class 0x110100
pci 0000:3f:13.5: [8086:3c44] type 00 class 0x110100
pci 0000:3f:13.6: [8086:3c45] type 00 class 0x088000
pci_bus 0000:3f: busn_res: [bus 3f-ff] end is updated to 3f
PCI: pci_cache_line_size set to 64 bytes
e820: reserve RAM buffer [mem 0x0008f000-0x0008ffff]
e820: reserve RAM buffer [mem 0xc8f54000-0xcbffffff]
e820: reserve RAM buffer [mem 0xc9457000-0xcbffffff]
e820: reserve RAM buffer [mem 0xcb6b9000-0xcbffffff]
e820: reserve RAM buffer [mem 0xcb718000-0xcbffffff]
e820: reserve RAM buffer [mem 0xcb7df000-0xcbffffff]
e820: reserve RAM buffer [mem 0xcb7f3000-0xcbffffff]
e820: reserve RAM buffer [mem 0xcb800000-0xcbffffff]
NetLabel: Initializing
NetLabel: domain hash size = 128
NetLabel: protocols = UNLABELED CIPSOv4
NetLabel: unlabeled traffic allowed by default
hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0, 0, 0, 0, 0, 0
hpet0: 8 comparators, 64-bit 14.318180 MHz counter
Switching to clocksource hpet
AppArmor: AppArmor Filesystem Enabled
pnp: PnP ACPI init
ACPI: bus type pnp registered
system 00:00: [mem 0xf0000000-0x107ffffff] could not be reserved
system 00:00: [mem 0xf8000000-0xffffffff] could not be reserved
system 00:00: Plug and Play ACPI device, IDs PNP0c02 (active)
pnp 00:01: [dma 4]
pnp 00:01: Plug and Play ACPI device, IDs PNP0200 (active)
pnp 00:02: Plug and Play ACPI device, IDs PNP0b00 (active)
pnp 00:03: Plug and Play ACPI device, IDs PNP0c04 (active)
pnp 00:04: Plug and Play ACPI device, IDs PNP0800 (active)
system 00:05: [io 0x0454-0x0457] has been reserved
system 00:05: Plug and Play ACPI device, IDs INT3f0d PNP0c02 (active)
system 00:06: [io 0x0500-0x057f] has been reserved
system 00:06: [io 0x0400-0x0453] has been reserved
system 00:06: [io 0x0458-0x047f] has been reserved
system 00:06: [io 0x0680-0x06ff] has been reserved
system 00:06: Plug and Play ACPI device, IDs PNP0c02 (active)
system 00:07: Plug and Play ACPI device, IDs PNP0c02 (active)
pnp 00:08: Plug and Play ACPI device, IDs PNP0003 (active)
pnp 00:09: Plug and Play ACPI device, IDs PNP0103 (active)
pnp: PnP ACPI: found 10 devices
ACPI: ACPI bus type pnp unregistered
PnPBIOS: Disabled by ACPI PNP
pci 0000:02:00.0: no compatible bridge window for [mem 0xfff80000-0xffffffff pref]
pci 0000:0a:00.0: no compatible bridge window for [mem 0xffff0000-0xffffffff pref]
pci 0000:00:1c.7: BAR 15: assigned [mem 0xe3700000-0xe37fffff pref]
pci 0000:00:01.0: PCI bridge to [bus 01]
pci 0000:02:00.0: BAR 6: assigned [mem 0xe3080000-0xe30fffff pref]
pci 0000:00:02.0: PCI bridge to [bus 02]
pci 0000:00:02.0: bridge window [io 0x4000-0x4fff]
pci 0000:00:02.0: bridge window [mem 0xe2000000-0xe30fffff]
pci 0000:00:02.0: bridge window [mem 0xd0000000-0xe1ffffff 64bit pref]
pci 0000:00:03.0: PCI bridge to [bus 03]
pci 0000:00:11.0: PCI bridge to [bus 04]
pci 0000:00:1c.0: PCI bridge to [bus 05]
pci 0000:00:1c.2: PCI bridge to [bus 06]
pci 0000:00:1c.2: bridge window [io 0x3000-0x3fff]
pci 0000:00:1c.2: bridge window [mem 0xe3400000-0xe34fffff]
pci 0000:00:1c.3: PCI bridge to [bus 07]
pci 0000:00:1c.3: bridge window [mem 0xe3300000-0xe33fffff]
pci 0000:00:1c.4: PCI bridge to [bus 08]
pci 0000:00:1c.5: PCI bridge to [bus 09]
pci 0000:00:1c.5: bridge window [io 0x2000-0x2fff]
pci 0000:00:1c.5: bridge window [mem 0xe3200000-0xe32fffff]
pci 0000:0a:00.0: BAR 6: assigned [mem 0xe3700000-0xe370ffff pref]
pci 0000:00:1c.7: PCI bridge to [bus 0a]
pci 0000:00:1c.7: bridge window [io 0x1000-0x1fff]
pci 0000:00:1c.7: bridge window [mem 0xe3100000-0xe31fffff]
pci 0000:00:1c.7: bridge window [mem 0xe3700000-0xe37fffff pref]
pci 0000:00:1e.0: PCI bridge to [bus 0b]
pci 0000:00:1e.0: setting latency timer to 64
pci_bus 0000:00: resource 4 [io 0x0000-0x0cf7]
pci_bus 0000:00: resource 5 [io 0x0d00-0xffff]
pci_bus 0000:00: resource 6 [mem 0x000a0000-0x000bffff]
pci_bus 0000:00: resource 7 [mem 0xd0000000-0xefffffff]
pci_bus 0000:02: resource 0 [io 0x4000-0x4fff]
pci_bus 0000:02: resource 1 [mem 0xe2000000-0xe30fffff]
pci_bus 0000:02: resource 2 [mem 0xd0000000-0xe1ffffff 64bit pref]
pci_bus 0000:06: resource 0 [io 0x3000-0x3fff]
pci_bus 0000:06: resource 1 [mem 0xe3400000-0xe34fffff]
pci_bus 0000:07: resource 1 [mem 0xe3300000-0xe33fffff]
pci_bus 0000:09: resource 0 [io 0x2000-0x2fff]
pci_bus 0000:09: resource 1 [mem 0xe3200000-0xe32fffff]
pci_bus 0000:0a: resource 0 [io 0x1000-0x1fff]
pci_bus 0000:0a: resource 1 [mem 0xe3100000-0xe31fffff]
pci_bus 0000:0a: resource 2 [mem 0xe3700000-0xe37fffff pref]
pci_bus 0000:0b: resource 4 [io 0x0000-0x0cf7]
pci_bus 0000:0b: resource 5 [io 0x0d00-0xffff]
pci_bus 0000:0b: resource 6 [mem 0x000a0000-0x000bffff]
pci_bus 0000:0b: resource 7 [mem 0xd0000000-0xefffffff]
pci_bus 0000:3f: resource 4 [io 0x0000-0xffff]
pci_bus 0000:3f: resource 5 [mem 0x00000000-0x3fffffffffff]
NET: Registered protocol family 2
TCP established hash table entries: 8192 (order: 4, 65536 bytes)
TCP bind hash table entries: 8192 (order: 4, 65536 bytes)
TCP: Hash tables configured (established 8192 bind 8192)
TCP: reno registered
UDP hash table entries: 512 (order: 2, 16384 bytes)
UDP-Lite hash table entries: 512 (order: 2, 16384 bytes)
NET: Registered protocol family 1
pci 0000:02:00.0: Boot video device
PCI: CLS 64 bytes, default 64
Trying to unpack rootfs image as initramfs...
Freeing initrd memory: 30608k freed
dmar: Host address width 40
dmar: DRHD base: 0x000000fe901000 flags: 0x0
dmar: IOMMU 0: reg_base_addr fe901000 ver 1:0 cap d2008c10ef0462 ecap f0207a
dmar: DRHD base: 0x000000fe900000 flags: 0x1
dmar: IOMMU 1: reg_base_addr fe900000 ver 1:0 cap d2078c106f0462 ecap f020fe
dmar: RMRR base: 0x000000c945a000 end: 0x000000c945afff
dmar: RMRR base: 0x000000c945f000 end: 0x000000c945ffff
Initialise module verification
audit: initializing netlink socket (disabled)
type=2000 audit(1367604941.664:1): initialized
bounce pool size: 64 pages
HugeTLB registered 2 MB page size, pre-allocated 0 pages
VFS: Disk quotas dquot_6.5.2
Dquot-cache hash table entries: 1024 (order 0, 4096 bytes)
fuse init (API version 7.20)
msgmni has been set to 1423
Key type asymmetric registered
Asymmetric key parser 'x509' registered
Block layer SCSI generic (bsg) driver version 0.4 loaded (major 252)
io scheduler noop registered
io scheduler deadline registered (default)
io scheduler cfq registered
pcieport 0000:00:01.0: irq 64 for MSI/MSI-X
pcieport 0000:00:02.0: irq 65 for MSI/MSI-X
pcieport 0000:00:03.0: irq 66 for MSI/MSI-X
pcieport 0000:00:11.0: irq 67 for MSI/MSI-X
pcieport 0000:00:1c.0: irq 68 for MSI/MSI-X
pcieport 0000:00:1c.2: irq 69 for MSI/MSI-X
pcieport 0000:00:1c.3: irq 70 for MSI/MSI-X
pcieport 0000:00:1c.4: irq 71 for MSI/MSI-X
pcieport 0000:00:1c.5: irq 72 for MSI/MSI-X
pcieport 0000:00:1c.7: irq 73 for MSI/MSI-X
aer 0000:00:01.0:pcie02: service driver aer loaded
aer 0000:00:02.0:pcie02: service driver aer loaded
aer 0000:00:03.0:pcie02: service driver aer loaded
aer 0000:00:11.0:pcie02: service driver aer loaded
pcieport 0000:00:01.0: Signaling PME through PCIe PME interrupt
pcie_pme 0000:00:01.0:pcie01: service driver pcie_pme loaded
pcieport 0000:00:02.0: Signaling PME through PCIe PME interrupt
pci 0000:02:00.0: Signaling PME through PCIe PME interrupt
pci 0000:02:00.1: Signaling PME through PCIe PME interrupt
pcie_pme 0000:00:02.0:pcie01: service driver pcie_pme loaded
pcieport 0000:00:03.0: Signaling PME through PCIe PME interrupt
pcie_pme 0000:00:03.0:pcie01: service driver pcie_pme loaded
pcieport 0000:00:11.0: Signaling PME through PCIe PME interrupt
pcie_pme 0000:00:11.0:pcie01: service driver pcie_pme loaded
pcieport 0000:00:1c.0: Signaling PME through PCIe PME interrupt
pcie_pme 0000:00:1c.0:pcie01: service driver pcie_pme loaded
pcieport 0000:00:1c.2: Signaling PME through PCIe PME interrupt
pci 0000:06:00.0: Signaling PME through PCIe PME interrupt
pcie_pme 0000:00:1c.2:pcie01: service driver pcie_pme loaded
pcieport 0000:00:1c.3: Signaling PME through PCIe PME interrupt
pci 0000:07:00.0: Signaling PME through PCIe PME interrupt
pcie_pme 0000:00:1c.3:pcie01: service driver pcie_pme loaded
pcieport 0000:00:1c.4: Signaling PME through PCIe PME interrupt
pcie_pme 0000:00:1c.4:pcie01: service driver pcie_pme loaded
pcieport 0000:00:1c.5: Signaling PME through PCIe PME interrupt
pci 0000:09:00.0: Signaling PME through PCIe PME interrupt
pcie_pme 0000:00:1c.5:pcie01: service driver pcie_pme loaded
pcieport 0000:00:1c.7: Signaling PME through PCIe PME interrupt
pci 0000:0a:00.0: Signaling PME through PCIe PME interrupt
pcie_pme 0000:00:1c.7:pcie01: service driver pcie_pme loaded
ioapic: probe of 0000:00:05.4 failed with error -22
pci_hotplug: PCI Hot Plug PCI Core version: 0.5
pciehp: PCI Express Hot Plug Controller Driver version: 0.4
intel_idle: MWAIT substates: 0x21120
intel_idle: v0.4 model 0x2D
intel_idle: lapic_timer_reliable_states 0xffffffff
input: Sleep Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0E:00/input/input0
ACPI: Sleep Button [SLPB]
input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input1
ACPI: Power Button [PWRF]
ACPI: Requesting acpi_cpufreq
GHES: HEST is not enabled!
isapnp: Scanning for PnP cards...
Linux agpgart interface v0.103
brd: module loaded
loop: module loaded
libphy: Fixed MDIO Bus: probed
tun: Universal TUN/TAP device driver, 1.6
tun: (C) 1999-2004 Max Krasnyansky
PPP generic driver version 2.4.2
ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
ehci-pci: EHCI PCI platform driver
ehci-pci 0000:00:1a.0: setting latency timer to 64
ehci-pci 0000:00:1a.0: EHCI Host Controller
ehci-pci 0000:00:1a.0: new USB bus registered, assigned bus number 1
ehci-pci 0000:00:1a.0: debug port 2
ehci-pci 0000:00:1a.0: cache line size of 64 is not supported
ehci-pci 0000:00:1a.0: irq 16, io mem 0xe3601000
ehci-pci 0000:00:1a.0: USB 2.0 started, EHCI 1.00
usb usb1: New USB device found, idVendor=1d6b, idProduct=0002
usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb1: Product: EHCI Host Controller
usb usb1: Manufacturer: Linux 3.8.0-19-generic ehci_hcd
usb usb1: SerialNumber: 0000:00:1a.0
hub 1-0:1.0: USB hub found
hub 1-0:1.0: 2 ports detected
ehci-pci 0000:00:1d.0: setting latency timer to 64
ehci-pci 0000:00:1d.0: EHCI Host Controller
ehci-pci 0000:00:1d.0: new USB bus registered, assigned bus number 2
ehci-pci 0000:00:1d.0: debug port 2
ehci-pci 0000:00:1d.0: cache line size of 64 is not supported
ehci-pci 0000:00:1d.0: irq 23, io mem 0xe3602000
ehci-pci 0000:00:1d.0: USB 2.0 started, EHCI 1.00
usb usb2: New USB device found, idVendor=1d6b, idProduct=0002
usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb2: Product: EHCI Host Controller
usb usb2: Manufacturer: Linux 3.8.0-19-generic ehci_hcd
usb usb2: SerialNumber: 0000:00:1d.0
hub 2-0:1.0: USB hub found
hub 2-0:1.0: 2 ports detected
ehci-platform: EHCI generic platform driver
ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
uhci_hcd: USB Universal Host Controller Interface driver
xhci_hcd 0000:07:00.0: xHCI Host Controller
xhci_hcd 0000:07:00.0: new USB bus registered, assigned bus number 3
xhci_hcd 0000:07:00.0: irq 74 for MSI/MSI-X
xhci_hcd 0000:07:00.0: irq 75 for MSI/MSI-X
xhci_hcd 0000:07:00.0: irq 76 for MSI/MSI-X
xhci_hcd 0000:07:00.0: irq 77 for MSI/MSI-X
xhci_hcd 0000:07:00.0: irq 78 for MSI/MSI-X
xhci_hcd 0000:07:00.0: irq 79 for MSI/MSI-X
xhci_hcd 0000:07:00.0: irq 80 for MSI/MSI-X
xhci_hcd 0000:07:00.0: irq 81 for MSI/MSI-X
usb usb3: New USB device found, idVendor=1d6b, idProduct=0002
usb usb3: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb3: Product: xHCI Host Controller
usb usb3: Manufacturer: Linux 3.8.0-19-generic xhci_hcd
usb usb3: SerialNumber: 0000:07:00.0
xHCI xhci_add_endpoint called for root hub
xHCI xhci_check_bandwidth called for root hub
hub 3-0:1.0: USB hub found
hub 3-0:1.0: 2 ports detected
xhci_hcd 0000:07:00.0: xHCI Host Controller
xhci_hcd 0000:07:00.0: new USB bus registered, assigned bus number 4
usb usb4: New USB device found, idVendor=1d6b, idProduct=0003
usb usb4: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb4: Product: xHCI Host Controller
usb usb4: Manufacturer: Linux 3.8.0-19-generic xhci_hcd
usb usb4: SerialNumber: 0000:07:00.0
xHCI xhci_add_endpoint called for root hub
xHCI xhci_check_bandwidth called for root hub
hub 4-0:1.0: USB hub found
hub 4-0:1.0: 2 ports detected
usb 1-1: new high-speed USB device number 2 using ehci-pci
isapnp: No Plug & Play device found
i8042: PNP: No PS/2 controller found. Probing ports directly.
serio: i8042 KBD port at 0x60,0x64 irq 1
serio: i8042 AUX port at 0x60,0x64 irq 12
mousedev: PS/2 mouse device common for all mice
rtc_cmos 00:02: RTC can wake from S4
rtc_cmos 00:02: rtc core: registered rtc_cmos as rtc0
rtc0: alarms up to one month, y3k, 114 bytes nvram, hpet irqs
device-mapper: uevent: version 1.0.3
device-mapper: ioctl: 4.23.1-ioctl (2012-12-18) initialised: dm-devel@redhat.com
EISA: Probing bus 0 at eisa.0
EISA: Cannot allocate resource for mainboard
Cannot allocate resource for EISA slot 1
Cannot allocate resource for EISA slot 2
Cannot allocate resource for EISA slot 3
Cannot allocate resource for EISA slot 4
Cannot allocate resource for EISA slot 5
Cannot allocate resource for EISA slot 6
Cannot allocate resource for EISA slot 7
Cannot allocate resource for EISA slot 8
EISA: Detected 0 cards.
cpufreq-nforce2: No nForce2 chipset.
cpuidle: using governor ladder
cpuidle: using governor menu
ledtrig-cpu: registered to indicate activity on CPUs
EFI Variables Facility v0.08 2004-May-17
ashmem: initialized
TCP: cubic registered
NET: Registered protocol family 10
NET: Registered protocol family 17
Key type dns_resolver registered
Using IPI No-Shortcut mode
Loading module verification certificates
MODSIGN: Loaded cert 'Magrathea: Glacier signing key: 91de7a0b580f416d81726d1f7134a3ecef081207'
registered taskstats version 1
Key type trusted registered
Key type encrypted registered
rtc_cmos 00:02: setting system clock to 2013-05-03 18:15:42 UTC (1367604942)
BIOS EDD facility v0.16 2004-Jun-25, 0 devices found
EDD information not available.
Freeing unused kernel memory: 784k freed
Write protecting the kernel text: 6252k
Write protecting the kernel read-only data: 2432k
NX-protecting the kernel data: 3988k
udevd[131]: starting version 175
Disabling lock debugging due to kernel taint
e1000e: Intel(R) PRO/1000 Network Driver - 2.1.4-k
e1000e: Copyright(c) 1999 - 2012 Intel Corporation.
e1000e 0000:00:19.0: setting latency timer to 64
e1000e 0000:00:19.0: Interrupt Throttling Rate (ints/sec) set to dynamic conservative mode
e1000e 0000:00:19.0: irq 82 for MSI/MSI-X
usb 1-1: New USB device found, idVendor=8087, idProduct=0024
usb 1-1: New USB device strings: Mfr=0, Product=0, SerialNumber=0
hub 1-1:1.0: USB hub found
hub 1-1:1.0: 6 ports detected
firewire_ohci 0000:06:00.0: added OHCI v1.10 device as card 0, 4 IR + 8 IT contexts, quirks 0x11
usb 2-1: new high-speed USB device number 2 using ehci-pci
e1000e 0000:00:19.0 eth0: (PCI Express:2.5GT/s:Width x1) 4c:72:b9:e5:b7:1b
e1000e 0000:00:19.0 eth0: Intel(R) PRO/1000 Network Connection
e1000e 0000:00:19.0 eth0: MAC: 10, PHY: 11, PBA No: FFFFFF-0FF
e1000e 0000:09:00.0: Disabling ASPM L0s L1
ahci 0000:00:1f.2: version 3.0
ahci 0000:00:1f.2: irq 83 for MSI/MSI-X
e1000e 0000:09:00.0: Interrupt Throttling Rate (ints/sec) set to dynamic conservative mode
ahci 0000:00:1f.2: AHCI 0001.0300 32 slots 6 ports 6 Gbps 0x1 impl SATA mode
ahci 0000:00:1f.2: flags: 64bit ncq sntf pm led clo pio slum part ems apst
ahci 0000:00:1f.2: setting latency timer to 64
e1000e 0000:09:00.0: irq 84 for MSI/MSI-X
e1000e 0000:09:00.0: irq 85 for MSI/MSI-X
e1000e 0000:09:00.0: irq 86 for MSI/MSI-X
scsi0 : ahci
scsi1 : ahci
scsi2 : ahci
scsi3 : ahci
scsi4 : ahci
scsi5 : ahci
ata1: SATA max UDMA/133 abar m2048@0xe3527000 port 0xe3527100 irq 83
ata2: DUMMY
ata3: DUMMY
ata4: DUMMY
ata5: DUMMY
ata6: DUMMY
ahci 0000:0a:00.0: irq 87 for MSI/MSI-X
ahci 0000:0a:00.0: AHCI 0001.0200 32 slots 8 ports 6 Gbps 0xff impl SATA mode
ahci 0000:0a:00.0: flags: 64bit ncq pio
scsi6 : ahci
scsi7 : ahci
scsi8 : ahci
scsi9 : ahci
scsi10 : ahci
scsi11 : ahci
scsi12 : ahci
scsi13 : ahci
ata7: SATA max UDMA/133 abar m2048@0xe3100000 port 0xe3100100 irq 87
ata8: SATA max UDMA/133 abar m2048@0xe3100000 port 0xe3100180 irq 87
ata9: SATA max UDMA/133 abar m2048@0xe3100000 port 0xe3100200 irq 87
ata10: SATA max UDMA/133 abar m2048@0xe3100000 port 0xe3100280 irq 87
ata11: SATA max UDMA/133 abar m2048@0xe3100000 port 0xe3100300 irq 87
ata12: SATA max UDMA/133 abar m2048@0xe3100000 port 0xe3100380 irq 87
ata13: SATA max UDMA/133 abar m2048@0xe3100000 port 0xe3100400 irq 87
ata14: SATA max UDMA/133 abar m2048@0xe3100000 port 0xe3100480 irq 87
usb 2-1: New USB device found, idVendor=8087, idProduct=0024
usb 2-1: New USB device strings: Mfr=0, Product=0, SerialNumber=0
hub 2-1:1.0: USB hub found
hub 2-1:1.0: 8 ports detected
e1000e 0000:09:00.0 eth1: (PCI Express:2.5GT/s:Width x1) 4c:72:b9:e5:b7:19
e1000e 0000:09:00.0 eth1: Intel(R) PRO/1000 Network Connection
e1000e 0000:09:00.0 eth1: MAC: 3, PHY: 8, PBA No: FFFFFF-0FF
usb 3-1: new low-speed USB device number 2 using xhci_hcd
usb 3-1: New USB device found, idVendor=1050, idProduct=0010
usb 3-1: New USB device strings: Mfr=1, Product=2, SerialNumber=0
usb 3-1: Product: Yubico Yubikey II
usb 3-1: Manufacturer: Yubico
usb 3-1: ep 0x81 - rounding interval to 64 microframes, ep desc says 80 microframes
usbcore: registered new interface driver usbhid
usbhid: USB HID core driver
input: Yubico Yubico Yubikey II as /devices/pci0000:00/0000:00:1c.3/0000:07:00.0/usb3/3-1/3-1:1.0/input/input2
hid-generic 0003:1050:0010.0001: input,hidraw0: USB HID v1.11 Keyboard [Yubico Yubico Yubikey II] on usb-0000:07:00.0-1/input0
ata1: SATA link up 6.0 Gbps (SStatus 133 SControl 300)
ata1.00: ATA-9: Samsung SSD 840 Series, DXT06B0Q, max UDMA/133
ata1.00: 488397168 sectors, multi 16: LBA48 NCQ (depth 31/32), AA
ata1.00: configured for UDMA/133
scsi 0:0:0:0: Direct-Access ATA Samsung SSD 840 DXT0 PQ: 0 ANSI: 5
sd 0:0:0:0: [sda] 488397168 512-byte logical blocks: (250 GB/232 GiB)
sd 0:0:0:0: Attached scsi generic sg0 type 0
sd 0:0:0:0: [sda] Write Protect is off
sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
sda: sda1 sda2 < sda5 >
sd 0:0:0:0: [sda] Attached SCSI disk
firewire_core 0000:06:00.0: created device fw0: GUID e0cb4e0000160850, S400
ata9: SATA link down (SStatus 0 SControl 300)
ata8: SATA link down (SStatus 0 SControl 300)
usb 3-2: new low-speed USB device number 3 using xhci_hcd
ata14: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
ata12: SATA link down (SStatus 0 SControl 300)
ata10: SATA link down (SStatus 0 SControl 300)
ata7: SATA link down (SStatus 0 SControl 300)
ata13: SATA link down (SStatus 0 SControl 300)
ata14.00: ATAPI: MARVELL VIRTUALL, 1.09, max UDMA/66
ata11: SATA link down (SStatus 0 SControl 300)
ata14.00: configured for UDMA/66
scsi 13:0:0:0: Processor Marvell 91xx Config 1.01 PQ: 0 ANSI: 5
scsi 13:0:0:0: Attached scsi generic sg1 type 3
usb 3-2: New USB device found, idVendor=046d, idProduct=c216
usb 3-2: New USB device strings: Mfr=1, Product=2, SerialNumber=0
usb 3-2: Product: Logitech Dual Action
usb 3-2: Manufacturer: Logitech
usb 3-2: ep 0x81 - rounding interval to 64 microframes, ep desc says 80 microframes
usb 3-2: ep 0x1 - rounding interval to 64 microframes, ep desc says 80 microframes
input: Logitech Logitech Dual Action as /devices/pci0000:00/0000:00:1c.3/0000:07:00.0/usb3/3-2/3-2:1.0/input/input3
hid-generic 0003:046D:C216.0002: input,hidraw1: USB HID v1.10 Joystick [Logitech Logitech Dual Action] on usb-0000:07:00.0-2/input0
usb 2-1.1: new low-speed USB device number 3 using ehci-pci
usb 2-1.1: New USB device found, idVendor=04f2, idProduct=0841
usb 2-1.1: New USB device strings: Mfr=1, Product=2, SerialNumber=0
usb 2-1.1: Product: HP USB Multimedia Keyboard
usb 2-1.1: Manufacturer: CHICONY
input: CHICONY HP USB Multimedia Keyboard as /devices/pci0000:00/0000:00:1d.0/usb2/2-1/2-1.1/2-1.1:1.0/input/input4
hid-generic 0003:04F2:0841.0003: input,hidraw2: USB HID v1.11 Keyboard [CHICONY HP USB Multimedia Keyboard] on usb-0000:00:1d.0-1.1/input0
input: CHICONY HP USB Multimedia Keyboard as /devices/pci0000:00/0000:00:1d.0/usb2/2-1/2-1.1/2-1.1:1.1/input/input5
hid-generic 0003:04F2:0841.0004: input,hiddev0,hidraw3: USB HID v1.11 Device [CHICONY HP USB Multimedia Keyboard] on usb-0000:00:1d.0-1.1/input1
usb 2-1.2: new low-speed USB device number 4 using ehci-pci
usb 2-1.2: New USB device found, idVendor=192f, idProduct=0416
usb 2-1.2: New USB device strings: Mfr=0, Product=2, SerialNumber=0
usb 2-1.2: Product: USB Optical Mouse
input: USB Optical Mouse as /devices/pci0000:00/0000:00:1d.0/usb2/2-1/2-1.2/2-1.2:1.0/input/input6
hid-generic 0003:192F:0416.0005: input,hidraw4: USB HID v1.11 Mouse [USB Optical Mouse] on usb-0000:00:1d.0-1.2/input0
bio: create slab at 1
bio: create slab at 1
EXT4-fs (dm-1): INFO: recovery required on readonly filesystem
EXT4-fs (dm-1): write access will be enabled during recovery
EXT4-fs (dm-1): recovery complete
EXT4-fs (dm-1): mounted filesystem with ordered data mode. Opts: (null)
Adding 8310780k swap on /dev/mapper/xubuntu--vg-swap_1. Priority:-1 extents:1 across:8310780k SS
EXT4-fs (dm-1): re-mounted. Opts: errors=remount-ro
IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready
IPv6: ADDRCONF(NETDEV_UP): eth1: link is not ready
udevd[587]: starting version 175
lp: driver loaded but no devices found
mei 0000:00:16.0: setting latency timer to 64
mei 0000:00:16.0: irq 88 for MSI/MSI-X
nvidia: module license 'NVIDIA' taints kernel.
ACPI Warning: 0x00000500-0x0000052f SystemIO conflicts with Region \IGPO 1 (20121018/utaddress-251)
ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver
vgaarb: device changed decodes: PCI:0000:02:00.0,olddecodes=io+mem,decodes=none:owns=io+mem
NVRM: loading NVIDIA UNIX x86 Kernel Module 310.44 Wed Mar 27 15:00:00 PDT 2013
snd_hda_intel 0000:00:1b.0: irq 89 for MSI/MSI-X
wmi: Mapper loaded
input: HDA Intel PCH Line as /devices/pci0000:00/0000:00:1b.0/sound/card0/input7
input: HDA Intel PCH Rear Mic as /devices/pci0000:00/0000:00:1b.0/sound/card0/input8
input: HDA Intel PCH Front Mic as /devices/pci0000:00/0000:00:1b.0/sound/card0/input9
input: HDA Intel PCH Front Headphone as /devices/pci0000:00/0000:00:1b.0/sound/card0/input10
input: HDA Intel PCH Line Out CLFE as /devices/pci0000:00/0000:00:1b.0/sound/card0/input11
input: HDA Intel PCH Line Out Surround as /devices/pci0000:00/0000:00:1b.0/sound/card0/input12
input: HDA Intel PCH Line Out Front as /devices/pci0000:00/0000:00:1b.0/sound/card0/input13
hda_intel: Disabling MSI
hda-intel 0000:02:00.1: Handle VGA-switcheroo audio client
microcode: CPU0 sig=0x206d7, pf=0x4, revision=0x70b
type=1400 audit(1367604963.990:2): apparmor="STATUS" operation="profile_load" name="/sbin/dhclient" pid=968 comm="apparmor_parser"
type=1400 audit(1367604963.990:3): apparmor="STATUS" operation="profile_replace" name="/sbin/dhclient" pid=969 comm="apparmor_parser"
type=1400 audit(1367604963.990:4): apparmor="STATUS" operation="profile_load" name="/usr/lib/NetworkManager/nm-dhcp-client.action" pid=968 comm="apparmor_parser"
type=1400 audit(1367604963.990:5): apparmor="STATUS" operation="profile_replace" name="/usr/lib/NetworkManager/nm-dhcp-client.action" pid=969 comm="apparmor_parser"
type=1400 audit(1367604963.990:6): apparmor="STATUS" operation="profile_load" name="/usr/lib/connman/scripts/dhclient-script" pid=968 comm="apparmor_parser"
type=1400 audit(1367604963.990:7): apparmor="STATUS" operation="profile_replace" name="/usr/lib/connman/scripts/dhclient-script" pid=969 comm="apparmor_parser"
type=1400 audit(1367604963.994:8): apparmor="STATUS" operation="profile_replace" name="/sbin/dhclient" pid=970 comm="apparmor_parser"
type=1400 audit(1367604963.994:9): apparmor="STATUS" operation="profile_replace" name="/usr/lib/NetworkManager/nm-dhcp-client.action" pid=970 comm="apparmor_parser"
type=1400 audit(1367604963.994:10): apparmor="STATUS" operation="profile_replace" name="/usr/lib/connman/scripts/dhclient-script" pid=970 comm="apparmor_parser"
microcode: CPU1 sig=0x206d7, pf=0x4, revision=0x70b
microcode: CPU2 sig=0x206d7, pf=0x4, revision=0x70b
microcode: CPU3 sig=0x206d7, pf=0x4, revision=0x70b
microcode: CPU4 sig=0x206d7, pf=0x4, revision=0x70b
microcode: CPU5 sig=0x206d7, pf=0x4, revision=0x70b
microcode: CPU6 sig=0x206d7, pf=0x4, revision=0x70b
microcode: CPU7 sig=0x206d7, pf=0x4, revision=0x70b
microcode: Microcode Update Driver: v2.00 , Peter Oruba
init: failsafe main process (1013) killed by TERM signal
Bluetooth: Core ver 2.16
NET: Registered protocol family 31
Bluetooth: HCI device and connection manager initialized
Bluetooth: HCI socket layer initialized
Bluetooth: L2CAP socket layer initialized
Bluetooth: SCO socket layer initialized
Bluetooth: BNEP (Ethernet Emulation) ver 1.3
Bluetooth: BNEP filters: protocol multicast
Bluetooth: BNEP socket layer initialized
Bluetooth: RFCOMM TTY layer initialized
Bluetooth: RFCOMM socket layer initialized
Bluetooth: RFCOMM ver 1.11
type=1400 audit(1367604964.146:11): apparmor="STATUS" operation="profile_load" name="/usr/sbin/tcpdump" pid=1203 comm="apparmor_parser"
init: avahi-cups-reload main process (1208) terminated with status 1
ppdev: user-space parallel port driver
e1000e 0000:00:19.0: irq 82 for MSI/MSI-X
input: HDA NVidia HDMI/DP,pcm=8 as /devices/pci0000:00/0000:00:02.0/0000:02:00.1/sound/card1/input14
input: HDA NVidia HDMI/DP,pcm=7 as /devices/pci0000:00/0000:00:02.0/0000:02:00.1/sound/card1/input15
input: HDA NVidia HDMI/DP,pcm=3 as /devices/pci0000:00/0000:00:02.0/0000:02:00.1/sound/card1/input16
init: udev-fallback-graphics main process (1424) terminated with status 1
e1000e 0000:00:19.0: irq 82 for MSI/MSI-X
IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready
IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready
vboxdrv: Found 8 processor cores.
vboxdrv: fAsync=1 offMin=0x2434a254 offMax=0x2434a254
vboxdrv: TSC mode is 'asynchronous', kernel timer mode is 'normal'.
vboxdrv: Successfully loaded version 4.2.10_Ubuntu (interface 0x001a0004).
vboxpci: IOMMU not found (not registered)
IPv6: ADDRCONF(NETDEV_UP): eth1: link is not ready
IPv6: ADDRCONF(NETDEV_UP): eth1: link is not ready
NVRM: GPU at 0000:02:00: GPU-fd58d2a2-6ecc-f136-bb03-0fa647a76fc3
e1000e: eth1 NIC Link is Up 1000 Mbps Full Duplex, Flow Control: Rx/Tx
IPv6: ADDRCONF(NETDEV_CHANGE): eth1: link becomes ready
usb 3-1: USB disconnect, device number 2
usb 3-1: new low-speed USB device number 4 using xhci_hcd
usb 3-1: New USB device found, idVendor=1050, idProduct=0010
usb 3-1: New USB device strings: Mfr=1, Product=2, SerialNumber=0
usb 3-1: Product: Yubico Yubikey II
usb 3-1: Manufacturer: Yubico
usb 3-1: ep 0x81 - rounding interval to 64 microframes, ep desc says 80 microframes
input: Yubico Yubico Yubikey II as /devices/pci0000:00/0000:00:1c.3/0000:07:00.0/usb3/3-1/3-1:1.0/input/input17
hid-generic 0003:1050:0010.0006: input,hidraw0: USB HID v1.11 Keyboard [Yubico Yubico Yubikey II] on usb-0000:07:00.0-1/input0
usb 3-1: USB disconnect, device number 4